Is there a potential for pooling water behind The Edge Vent on 3/12 & 4/12 pitch roofs?

No, The Edge Vent was designed to shed water at these roof pitches. Any water will be traveling from the peak of the roof all the way down to the edge of the roof with increased speed and volume. Thus, the water should safely clear The Edge Vent and the roof. The Edge Vent was designed so that when installed on a minimum pitch 3/12 roof the roof would still maintain an angle of decent towards the bottom edge of the roof. When installed on a 3/12 pitch, it can be deceiving because the angle is not very steep; only 2-3 degrees and may look like a pool area. It rapidly transitions back to 14 degrees.

intake theedge xlg

Air Vent Contractor LocatorOur exclusive Contractor Locator will allow you to find contractors in your area who can assist with Air Vent product installation—including solar attic fans and skylight tubes. Click the link below to register and get started.

 

Search for Contractors