The Edge™ Vent - Success Stories

Air Vent’s shingle-over, rooftop-installed Edge Vent is the perfect intake vent for homes with or without overhangs. And it keeps roofers on the roof where they are most comfortable. Here are examples of successful projects.

Calkins Construction, Inc., Waynesburg, OH
Address: 7000 Indian Run, Waynesburg, OH 44688
Phone: 330-866-5450
Email: dougcalkins@aol.com

“We used The Edge Vent on the last home we shingled. The home had no overhangs but The Edge Vent was able to provide intake ventilation for the roof. We were very satisfied with the product and feel it looks perfect! The homeowner was also very pleased with the appearance. We will be happy to use this product in the future.” – Doug Calkins, Owner, Calkins Construction

Editor’s Notes: Calkins Construction used ShingleVent® II ridge vent for exhaust and then balanced the attic system with The Edge Vent for intake.

Close-Up Front View		Close-Up Side View		Edge Vent & ShingleVent® II

Elite Exteriors, Inc, Burnsville, MN
Address: 1505 Southcross Drive W, Suite B, Burnsville, Minnesota 55306
Phone: 651-688-7808
Web: http://www.eliteexteriors.us/

“The Edge Vent is an excellent product. The homeowner has seen a drastic improvement in the air temperature in the upper level of his home; which ultimately will increase the longevity of the roof life of his home. Our Project Manager Jake Geisler evaluated the roof and worked closely with the local Air Vent representative Bill Pierro to specify The Edge Vent for this house that did not have an overhang for traditional intake vents.” – Jason Vogen, CEO, Elite Exteriors.

Editor’s Notes: This two-story house previously had individual roof louvers for exhaust ventilation without any intake ventilation (the house does not have an overhang/soffit). Elite Exteriors balanced the attic ventilation system by replacing the roof louvers with Air Vent’s ShingleVent® II ridge vent for exhaust and added The Edge Vent for intake.

Before		After		Installation